Know the Facts About Granite BenchTop Installations
Durable yet moving a granite countertop from the warehouse to your kitchen for granite benchtops installations can be a little tricky.
Granite has gained in popularity as a natural stone surface for kitchen and bathroom countertops because of its durability and the fact that it looks as good as new over the decades. It is an obvious choice for homeowners as it increases the value of their home due to its beauty. The granite benchtops installations process, however, can be a bit tricky so here is some information that could help you understand what to expect.
Though granite is tough and durable yet moving a granite countertop from the warehouse to your kitchen for granite benchtops installations can be a little tricky. The best way to do it is by using a wooden A-frame to avoid breaking or chipping. The big benchtops are rather heavy, and a crane needs to be used to place it on a truck. It is best to get professionals to handle the transport process to avoid disaster.
Custom Cut On-Site:
A slab for granite benchtops installations will not be cut off-site as it could mean an improper fit. A professional contractor will always cut your granite on-site to ensure that it fits perfectly around your sink or other fixtures in the kitchen.
Cut Granite with Specialty Saws:
Granite being a strong and durable stone the power required to cut through it is considerable. Though thinner granite slabs can be cut with a normal circular or table saw, a thick and large one will need water-cooled blades to cut it. Diamond blades are also used to cut through the material easily.
The Installation Begins Before It Arrives:
Problem-free granite benchtops installations require beginning the process when the cabinets are installed in the kitchen. The cabinets must be properly prepped with plywood and level so that they are able to hold the weight of the granite. This is ensured by placing the proper plywood support at the top of the cabinets. This requires a professional installer to
- Create a template of your countertop so they know how to cut the slab
- fit the surface more than once so that it fits well
- Take final steps to prevent leaking between seams by sealing it with resin
Granite Tile Looks Great and Are Easier to Install:
Granite slabs are more expensive than granite tiles as they are thinner than slabs. The tiles should be spaced close together and the grout must be sealed to prevent moisture absorption and dirt and grime. Though the granite tiles may not appear as seamless as the slab for granite benchtops installations but the fact that there is a lower return on investment than granite slabs, the savings made will allow you to spend on kitchen upgrades.
Use a Stone Enhancer:
A stone enhancer used after granite benchtops installations will darken the surface and give a wet look which helps to bring out the detail and color of the stone. Enhancer sealer combos help you achieve two things at one go.
If you want your granite benchtop to look great years after installing it, you need to remember certain things. Remember that like all-natural stones granite is porous. It can get stained if liquid seeps in. Granite is also sensitive to acid. To avoid such disasters -
- Seal your granite before you use it
- Reseal your granite annually
- Make sure you clean up a spill right away
- Avoid using acidic cleaners
- Use a grease-cutting soap
There is no doubt about the fact that granite is the best choice for your benchtops in the kitchen. They may be a little expensive but in the long run the durability pays off. Initial investment maybe a little more than you would bargain for but it enhances the beauty and value of your home. So, granite should be your first choice when you are building a home or renovating a kitchen.